- Car Stereo Message Forums
 - - Technical and System Design
 - - - old school rocksford fosgate punch 45 with 2 toby 10" subs?

will it work? i have 2 toby 10" subs 8ohm a piece. will it work with a punch 45 amplifier. need suggestions.

The punch 45 was a beast for it's size, but unless those are unusually low power 10's that amp's probably not going to do much for them.
You can wire them parallel for 4 ohms and bridge the amp (http://m.seimg.net/product/img/subwoofer_wiring/2_subs_SVC_8_ohm_2ch_bridged.jpg). You might get 150w or so out of it, so 75w per sub.

It'll work, but unless those are the most efficient 10's ever made you can't expect to get much out of them.