Few questions on Kicker 03C124

First subwoofer . I will be putting in a sealed enclosure. I want good SQ and low-end but don't want too loud... DON'T want to wake up the neighbors if you know what I mean... Sub specs: polypropylene cone polyester foam surround double stitched to the cone edge can be used in free-air applications frequency response 25-500 Hz power range 30-150 watts RMS peak power handling 300 watts sensitivity 88.6 dB SPL top-mount depth 5-5/8" sealed box volume 1.25-3.5 cubic feet Will I blow this sub with this amp? Profile AP1000M Peak Output Power (4 Ohms): 650W x 1 RMS Output Power (4 Ohms): 310W x 1 Peak Output Power (2 Ohms): 1000W x 1 RMS Output Power (2 Ohms): 500W x 1 MOSFET Power Supply I can pick one up for $35 shipped...

Report this post to a moderator

 

yeah, put it in a sealed encosure, i think a 1.25 or even a 1.0 cu ft box will work good, and help get those lows that yer looking for

Report this post to a moderator

 

this sub will actually sound cleaner in a larger box, you can get the flattest responce at about 4.3cuft. it should sound pretty tight and good with a smaller box though. as for the amp, it kinda depends, if ur sub is SVC 4ohm, you'll be okey, if its dvc 4ohms, then u might want to set the gain low.

Report this post to a moderator