Wiring On XXX-15 Soundstream Sub to XXX6500 Amp

I have 2 xxx-15 soundstream subs and was wondering how i would wire 2 soundstream xxx6500 to them? im not good in wiring at all. The subs are quad 1 ohm. All i know is that i could put them all the way down 2 .25 and run them but im wanting to have these wired at 1 ohm on each sub and didnt know if that was possible or maybe 2 ohms if i strap them. is there anyway that this can work. Thanks alot david

Report this post to a moderator

 

can't find any good qvc diagrams.

Just think of this as 4 coils instead of two subs - You'd do this on each amp. This shows 4 ohm coils, but as you might expect, 1 ohm coils would net 1 ohm at the amp.

Report this post to a moderator