installing the basics

just came up on this box,now its time to put these two JLw6 's in ,the box is only about two and a half feet(way too small for an astro van (96) but ive been stallin on puttin any glass in there until i come up with the perfect design (interior) for it,ANYWAYS HERES THE DEAL YALL.....After i put the head unit in(kenwood KDC-10280 ,then the front speakers(some illuminite speakers made by dual) that lite up brite blue ,ran the wires to the back installed a (directsound amplifier 1500d) thats been waitin for the perfect opportunity to shine again and this chump change crossover from optimus(from radioshack)  well here lies the problem yall..after about a couple of hours swangin through the streets of the 330 you know,you know. The worst happened the BOX  CUT OFF!!!. So you know no biggie ,the 1500 has already tore through a couple of tens and twelves already.but after three hours of tryin ta prove to myself that (I KNOW WHAT IM DOIN) speech i said !#*@ it  i need some help. (Ima tarus!!) >>> The power and standby light blink back and fourth and no sound comes out the box at all thats it!!  im about to take the pics and upload em right now.ILL BE ON HERE ALL DAY SO HOLLA AT YA BOY!! 

Report this post to a moderator

 

Unhook the woofers from the amp and see if it still powers up in protect mode.

Report this post to a moderator

 

Still nothin,i rewired the amp ,and crossover and the speakers are not even hooked up an the shits still blinkin back and fourth,think im goin to have ta take the amp apart?

Report this post to a moderator