yesterday out of the blue my car door started popping while I open it, not as bad when i shut it. in front the body seam is right up against the door seam, so the door is sitting forward... pushed/bent toward the front of the car.

The rear seam is now a big gap.

I checked the hinges, they dont look bent or like they have any play.

[IMG]http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0001-5.jpg[/IMG]

[IMG]http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0002-5.jpg[/IMG]

[IMG]http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0003-6.jpg[/IMG]

[IMG]http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0004-3.jpg[/IMG]

[IMG]http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0005-3.jpg[/IMG]

top hinge

[IMG]http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0006-2.jpg[/IMG]

bottom hinge

[IMG]http://i248.photobucket.com/albums/gg178/kryptonitewhite/mix/DSC_0007-2.jpg[/IMG]

sorry this camera blows

I tried lifting the end of the door, there is no play, and visually the black rubber/plastic bushings look OK... bolts tight....