Before you purchase any component, plan your system
very carefully. You need to consider if you are going to buy the whole system all
at once or piece by piece, how much you want to spend and what quality and quantity of
sound you want. Are you doing a flashy or stealth installation? Are you
keeping your factory panels or are willing to cut your car to achieve better sound?
Are you doing the installation yourself, or leave it to a professional?
The most important part of the system. Get a good
head unit from a name brand. If you skimp here, your whole system will suffer.
For people that are on a budget: Get good quality head unit without all the bells
and whistles. A flip down face with a colorful display looks great, but it won't
necessarily sound better that a regular plain head unit. If you are planning to get
amplifiers in the future, get a head unit with RCA outputs.
The second most important part of the system. If
you are on a budget, just get a nice set of speakers up front and don't even worry about
the rear speakers, amplifiers, etc until you have some more money later on.
Speaker installation is definitely the most important
aspect that determines how your whole system sounds. No equalizer or processor can
compensate for poorly installed speakers.
Factory locations are usually not acceptable for
audiophile quality sound. Speakers should ideally be pointing straight at you.
Speakers on each side should be as close to each other as possible with no obstructions.
Speakers should be mounted on a good baffle (preferably an enclosure). Difference
between left and right speaker distances to your ears should be as small as possible.
The front speakers should also play as low as possible
in frequency (ideally 60Hz or less), being able to handle full power. This is where
crossovers with high slopes come in to protect the speakers.
Amplifiers do not only make a system sound louder, they
make it sound BETTER. The more power you get, the cleaner the signal going into the
speakers. A common misconception is that if a 100 watt amplifier is used on 50 watt
speakers, the speakers will burn. This is not true, as long as there is no
distortion and the speakers are properly protected with crossovers. More power is
For systems with a lot of power, you might also have to
upgrade the car's electrical system, by getting a high output alternator, capacitors, etc.
Subwoofers cover low frequencies in the audio
spectrum. Subwoofers need to be installed in a box designed specifically for
them. Put a subwoofer in the wrong type or size box and it will not perform as it
should and could be destroyed.
Subwoofers need a lot of power to play at acceptable
levels without distortion.
Matching subs (and speakers) to amplifiers
This is a very important aspect of system planning that
is often overlooked. Amplifiers are designed to provide maximum power at a certain
impedance. An amplifier at this maximum level will be under more stress and produce
more heat, so mounting location also becomes important. Professional installers wire
subs (and speakers) in parallel and/or series combinations to obtain a load that will make
the amplifier perform at full power.
Many people believe that they need to have an
equalizer, center channels, rear speakers, etc for better sound and compromise by buying
cheaper components. A properly designed system will sound great without the need for
all this other components.
If you have the money and are an audiophile or into
competition, then this "extra" components can become important.
Always keep in mind future upgrades when buying audio
gear. For example, let's say you are low on funds and want to add two subwoofers and
an amplifier. Since powerful amplifiers are expensive, you can get a 2-channel
amplifier to drive the subwoofers at acceptable levels. Later on, when you have more
money, you can buy an identical amplifier and power each sub with an amplifier in bridged
mode for more bass. If you planned carefully, the impedance's of your subwoofers
will match the amplifiers for maximum output in the bridged configuration.
Buying better quality components will definitely
increase system performance. Although name brands are more expensive, they are more
reliable (read: will last longer).
For people on tight budgets, it is better to save for a
better component and take longer building a better system one component at a time.
Even though you will save money and learn something new
by doing the installation yourself, sometimes it is better to pay a professional to do
things that might be a bit over your head. An experienced installer has many years
of experience that will definitely make a difference in your system's performance and
reliability. If something goes wrong, you can always go back and have them fix the
problem. Many manufacturers offer and extended warranty period if the equipment is
installed by an authorized professional.